Cookie Img
Back to top
Home » Products » Cables And Wires » power cables

power cables

power cables
power cables
Product Code : 29
Product Description

We are the most trusted name engaged in manufacturing, exporting and supplying high quality Power Cables. The cables provided by us are precisely manufactured at our modern manufacturing unit with the help of sophisticated technology by utilizing quality approved raw materials under the strict supervision of our experienced professionals. These cables are primarily used to supply power for office automation and domestic home appliances wiring. Additionally, our clients can get these Power Cables from us in varied lengths and thicknesses at nominal rates.


  • High endurance

  • Shock-proof

  • Flexibility

  • Corrosion resistance

Power Cables

Shital Electric Co are Authorised Distributor for Polycab Power Cables & Politech Shielded Cables  A power cable is an assembly of two or more electrical conductors, usually held together with an overall sheath. The assembly is used for transmission of electrical power. Power cables may be installed as permanent wiring within buildings, buried in the ground, run overhead, or exposed. Medium and high-voltage power cables, in circuits over 2000 volts, will have a shield layer of copper or aluminum tape or conducting polymer. If an unshielded insulated cable is in contact with earth or a grounded object, the electrostatic field around the conductor will be concentrated, resulting in corona discharge, and eventual destruction of the insulation. As well, leakage current and capacitive current through the insulation presents a danger of electrical shock on contact. The grounded shield equalizes electrical stress around the conductor, diverts any leakage current to ground, and blocks capacitive current from flowing into objects (or persons) touching the exterior of the cable. The Power Cables are used under ground as well as overhead transmission of power in power plants, industries, projects and all other electrical installations.

Selection of Power Cables

Power cables are generally selected considering the application. However following factors are important for selection of suitable cable construction required to transport electrical energy from one end to the other.

  •     Maximum operating voltage.

  •     Insulation level.

  •     Frequency.

  •     Load to be carried.

  •     Possible overloading duration &  magnitude.

  •     Route length and voltage drop.

  •     Flame retardant properties.

  •     Plant safety requirements.

  •     Mode of installation considering installation environment such as ambient & ground temperature, chemical and physical properties of soil.

 Parameters required are as under

  •     Voltage Grade - 650/1100 Volts.

  •     Relevant Indian standard - IS-7098 (Part-1) - 1988 or Intarnational standard - IEC- 60502 & BS-5467/DIN.

  •     Number of cores. - Single, Two, Three, Three & Half or Four Cores.

  •     Conductor - Size, wherever applicable size of reduced natural conductor.

  •     Conductor material - Copper / Aluminium

  •     Type of Insulation - XLPE

  •     Type of inner sheathing - PVC Wrapped/PVC Extruded.

  •     Type of Armour - Unarmoured/Strip Armoured/Wire Armoured/Tape Armoured

  •     Type of outer sheath - PVC/Flame Retardent/Flame Retardent Low Smoke/Zero Halogen (LSOH).